Winnetka Electrical Company handles residential and commercial electrical work across Winnetka, any hour of the day, any day of the week. Whether a breaker keeps tripping at midnight, a rental property needs new circuits before a tenant moves in, or a business is adding equipment that the current panel cannot support, we take the call and get the work scheduled.
Call (747) 399-5446 for a quote.
From everyday outlet and switch work to full panel replacements, we cover the range of electrical jobs that homes and businesses in this area actually need. Nights, weekends, and holidays are no different from any other day. If the power is off or something is not working right, reach out and we will start at the panel.
Good electrical work isn't complicated, it's just done right, and that starts with reading the symptoms correctly. Flickering lights, dead outlets, a breaker that keeps tripping, or half a house with no power are all signals that something in the system needs attention. Some of these point to a single faulty device. Others point to a wiring problem, a failing breaker, or a load issue that has been building for a while.
A diagnostic visit covers the panel, the affected circuits, and the outlets or fixtures involved. We trace the fault before any work starts, and we explain what we found and what it takes to correct it. GFCI and AFCI protection are part of this conversation: older homes often lack the protection that current code requires, and a troubleshooting visit is a natural point to address gaps in those circuits.
Outlets that stopped working, lights that dim when an appliance kicks on, and breakers that trip repeatedly are all common calls. None of them require guesswork. We'll sort the wiring and clean up after.
For homeowners and property managers alike, an aging or undersized panel is one of those problems that shows up gradually and then all at once. A panel that was sized for the load of a few decades ago may not have the capacity for a modern kitchen, a home office, an EV charger, or the air conditioning load that Winnetka summers put on a system. When breakers trip regularly, circuits feel sluggish, or there is simply no room to add what the property needs, a panel upgrade is usually the right answer.
A 200-amp service upgrade replaces the main panel and, where needed, the service entrance. Load calculations factor in what is already running and what is planned, so the new panel is sized for the property's actual needs. Subpanel installation is part of this work when a garage, workshop, or addition needs its own distribution point.
Pricing for panel work is discussed on the call before anything is scheduled. The scope, the access requirements, and what the job involves are all covered up front. Call and we'll handle the lights, outlets, and panel.
Choosing the right electrical fix is easier than it sounds, especially when the job is a straightforward installation. Outlet and switch work covers a wide range: adding receptacles in a room that does not have enough, replacing standard outlets with GFCI or AFCI versions, installing dimmer switches, or upgrading older two-prong outlets to grounded three-prong. Each of these is a job we handle on its own or as part of a larger visit.
Lighting work runs from recessed LED installation in kitchens and living rooms to under-cabinet lighting, exterior fixtures, and landscape lighting along walkways and driveways. Recessed lighting in particular changes how a room feels, and the wiring involved is straightforward when the ceiling access is workable. We assess the circuit load and confirm whether an existing circuit can carry the addition or whether a dedicated circuit is the right call.
Ceiling fan installation is another common request, especially in rooms that get warm in summer. Wiring a fan where no fixture existed before involves a ceiling box rated for fan weight and a switched circuit. We handle the box, the wiring, and the connection.
Your home deserves wiring that's safe and up to code, and in a neighborhood like Winnetka, the housing stock covers a wide range of ages and conditions. Older homes may still have knob-and-tube wiring, aluminum branch circuits, or two-wire systems without a ground. These are not just code issues. They affect what can be safely added to the system and what an insurance carrier will accept.
Full and partial rewiring replaces old wiring with modern copper conductors run to current standards. Aluminum wiring remediation addresses the connection points where aluminum meets devices not rated for it. Grounding and bonding are part of any rewiring job, not an afterthought. Adding a circuit for a circuit is often simpler than people expect, whether the need is a dedicated line for a refrigerator, a washer, a home office setup, or kitchen equipment that draws more than a shared circuit can handle.
Wiring work checked against code before sign-off is how these jobs close. We'll sort the wiring and clean up after.
The San Fernando Valley runs genuinely hot in summer, and California as a whole leads the country in EV adoption and rooftop solar. These three services come up constantly in Winnetka and across Los Angeles County, and each one starts with the electrical work that makes the rest possible.
A Level 2 home charger requires a 240-volt dedicated circuit run from the panel to the garage or parking area. The panel has to have the capacity for it, and if it does not, that conversation happens first. We assess the panel, determine the best route for the circuit, and install the outlet or hardwired connection the charger requires. This is one of the most common calls we get in this part of Los Angeles County, and the electrical side of it is well-defined work with a clear scope.
We handle the electrical side of solar and battery backup setups: the panel capacity, the dedicated circuits, and the wiring that ties a battery system into the home's distribution. Public-safety power shutoffs during wildfire season have made battery backup a practical concern rather than an optional upgrade for many households here. We do not install solar panels or inverters, but we prepare the panel and run the circuits that a solar-ready or battery-backup system requires.
Panel-level surge protection covers every circuit in the house from a single installation point. It matters most in homes with sensitive electronics, smart-home systems, or appliances with circuit boards that are expensive to replace. The device installs at the main panel and intercepts voltage spikes before they reach the wiring. It is a straightforward installation with a clear benefit, and it is worth discussing any time panel work is already on the schedule.
A backup generator is only useful if it is wired correctly. A transfer switch isolates the generator from the utility line, which protects the equipment and keeps the power safe to use. We install the transfer switch, run the connection from the panel, and confirm the circuits the generator will carry. Standby battery systems follow a similar approach on the electrical side.
Electrical safety inspections make sense before buying a property, after storm or water damage, or when a home has not had any electrical work reviewed in years. An inspection covers the panel condition, grounding, visible wiring, outlet function, GFCI and AFCI protection, and smoke detector and hard-wired carbon monoxide detector installation where those are missing. The wiring done properly, start to finish, is the standard we apply whether the job is a full inspection or a single circuit check.
Electrician costs vary by job, and the honest answer is that the price depends on what the work actually involves. A single outlet replacement is a different conversation from a panel upgrade or a rewiring project. What does not vary is when you find out: the rate and the scope are discussed on the call before anything is scheduled.
Common questions we hear: what does it cost to add a circuit, replace a breaker, install recessed lighting, or upgrade a panel. Each of those has a range that depends on the panel condition, the circuit distance, the ceiling access, and whether any additional work is needed to bring things up to code. Ask on the call and you get a straight answer on what applies to your specific job.
We show up ready to wire, and the pricing conversation happens before we do.
Call (747) 399-5446 for a quote on any electrical job, large or small.
We handle electrical work across Winnetka and the communities around it, including Chatsworth, Reseda, Canoga Park, Woodland Hills, Tarzana, Granada Hills, Northridge, and West Hills. Residential and commercial jobs are both part of the regular workload, from single-family homes and apartment buildings to retail spaces and small commercial properties throughout the west San Fernando Valley.
The work is carried out locally, and the range of jobs reflects what this part of Los Angeles County actually needs. Reach out and we'll start at the panel.
We cover the full range of residential and commercial electrical work in Winnetka and the surrounding communities in Los Angeles County. That includes everyday repairs, breaker panel upgrades, outlet and switch installation, lighting, ceiling fans, wiring and rewiring, EV charger circuits, generator hookups, and whole-home surge protection. If the job involves the wiring or the panel, call us and we will scope it on the phone.
We are available at any hour, any day of the week, including nights, weekends, and holidays. There are no after-hours restrictions and no difference in how calls are handled based on the time of day.
Call (747) 399-5446 and describe what is happening, and we will get the job scheduled.
Call (747) 399-5446 and describe the job.
We scope the work on the phone, explain what it involves, and give you a price before anything is scheduled. No commitment is required to get a quote, and the number you hear reflects the actual work based on what you describe.
It helps to know where the problem is showing up, which outlets or fixtures are affected, and whether any breakers have tripped. If the issue is at the panel, note whether breakers look normal or whether any have moved to the middle position. The more detail you can give on the call, the more accurately we can scope the job and give you a price.
The scope and price are settled on the call first. Once that is confirmed, we schedule the visit based on what the job requires and what the calendar allows. For urgent or emergency calls, we take those at any hour and work to get someone out as quickly as the schedule permits.
Check the main breaker first, then look for any individual breakers that have tripped to the middle position and reset them. If the breakers look normal but power is still out in part of the house, the fault may be in the wiring or at the panel rather than a simple trip. Call us and describe what you are seeing so we can help you figure out whether this is something to address immediately or schedule as a diagnostic visit.
For most jobs, someone needs to be present to provide access to the panel and the work areas. If that is not possible, let us know when you call and we can discuss what access arrangements make sense for the specific job. Some situations allow for a key or a code, but that depends on the scope of the work.
Yes, clear access to the panel makes a real difference in how efficiently the work gets done. Move anything stored in front of or around the panel, and clear a path to any outlets, fixtures, or work areas involved in the job. We will let you know on the call if there is anything specific to prepare for the type of work being done.
That depends on the job. A single outlet replacement or breaker swap can take under an hour. A panel upgrade or a rewiring project takes considerably longer, sometimes a full day or more depending on the scope. We give you a realistic time estimate on the call when we scope the work, so you know what to expect before we arrive.
That is a question we answer directly on the call when the job is scoped. Payment terms depend on the scope and the specific job. Ask when you call for a quote and you will get a straight answer on what applies to your project.
The price is based on the scope described on the call. If the work turns out to involve something that was not visible or known at the time of the quote, we explain what changed and what it means for the cost before proceeding. Nothing additional gets done without the customer knowing what it involves and what it costs.
Straight answers on the phone. Real electrical work. Quick to respond.
Winnetka Electrical Company is available around the clock, any day of the week, for electrical repairs, installations, panel work, and everything in between. Whether the job is urgent or something you have been planning for a while, the process starts the same way: a call, a conversation about the scope, and a price before anything is scheduled.
This area has its own wiring habits. The work is matched to them. Everything is left to code.
Call (747) 399-5446 for a quote.
Every electrical job we handle in Winnetka starts the same way: a clear explanation of what is wrong, a price confirmed before anything is scheduled, and work that is checked against code before sign-off. The table below covers the full range of services we offer, from everyday repairs to panel upgrades and EV charger installation. Use it to find the service that fits your situation, then call for a quote.
| Electrical Service | What the Job Involves | Ideal For | What to Keep in Mind |
|---|---|---|---|
| Electrical Panel & Service Upgrades |
| Homes adding an EV charger, remodeling, or running out of panel capacity | Panel upgrades often involve the utility and may require a permit. We scope all of that on the call so nothing is a surprise when the job is scheduled. |
| Older-Home Rewiring |
| Mid-century and pre-1980s homes that have not had wiring updated | Aluminum branch circuit wiring can loosen at connections over time as it expands and contracts with heat. That is worth addressing before it becomes a fault. |
| Outlet & Switch Installation |
| Kitchens, bathrooms, garages, and any room needing updated or added outlets | Current code requires GFCI protection near water sources and AFCI protection in bedrooms and living areas. Older homes frequently lack both. |
| Hot-Tub Circuits |
| Homeowners installing a hot tub or spa who need the electrical supply run | An EV charger or a hot tub often means checking the panel first. Code requires a dedicated circuit with GFCI protection and a disconnect within sight of the unit. |
| EV Charger Installation |
| Homeowners with an electric vehicle who want overnight charging at home | The job starts with a panel load calculation. If the panel is near capacity, that conversation happens on the call before anything is scheduled. |
| Dedicated Appliance Circuits |
| Any appliance or equipment that performs better and more safely on its own circuit | Adding a circuit is often simpler than people expect, especially when the panel still has capacity and the run is straightforward. |
| Breaker & Fuse Repair |
| Homes where a breaker trips repeatedly or will not hold after being reset | A breaker that trips immediately on reset often points to a wiring fault rather than the breaker itself. We check both before recommending a fix. |
| Standby Battery for Outages |
| Homes that need to keep key circuits running during public-safety power shutoffs | A transfer switch keeps the generator isolated from the utility line, which is a code requirement and a safety necessity. We scope the critical circuits on the call. |
| Lighting Installation |
| Homeowners upgrading interior lighting or adding outdoor and security lighting | Exterior lighting wiring in Southern California is worth doing in conduit where sun and heat exposure can degrade unprotected cable over time. |
| Electrical Repairs & Troubleshooting |
| Any home or property with an unexplained electrical symptom | A diagnostic visit traces the problem to its source before any repair is proposed, so you know exactly what was found and what fixing it involves. |
| Ceiling Fan Installation |
| Rooms without existing fan wiring or where the current switch leg cannot carry the load | In older Winnetka homes, ceiling fan installation often reveals a switch leg that was never sized for a fan and motor combination. We check before mounting. |
| Electrical Safety Inspections |
| Buyers, sellers, landlords, and owners of homes with older wiring | An inspection before a renovation or a property transaction gives a clear picture of what the system can handle and what needs attention before work or occupancy begins. |
| Solar & Battery Backup |
| Homeowners adding solar, battery storage, or backup power for outage protection | We handle the electrical connections between the inverter or battery system and the panel. We do not install the solar panels or battery hardware itself, but we coordinate with the equipment installers. |
| Wiring & Circuit Installation |
| Older homes with outdated wiring or any property adding significant new load | Homes built before the 1980s in the San Fernando Valley commonly have wiring that was installed under standards that no longer apply. A visit confirms what is actually there. |
| Whole-Home Surge Protection |
| Homes with sensitive electronics, EV chargers, or solar and battery systems | Grounding quality directly affects how well a whole-home surge device performs. We check grounding and bonding as part of every surge protection installation. |
Call (747) 399-5446 and describe your situation. We will scope the job, confirm the price, and get it on the schedule.
(747) 399-5446