U.S. Electric Force is Winnetka's go-to electrical contractor for homeowners, landlords, property managers, and businesses across Los Angeles County. Whether you need a fast repair, a full panel upgrade, or new wiring for a renovation, we handle it all. Same-day availability means you are not waiting days to get the power back on. We power your home. We protect your circuits. We earn the call.
Residential or commercial, big job or small, call us for a quote and we will get you scheduled.
Dealing with a tripping breaker or a dead outlet? These are the calls we take every day, and we move on them fast. A dead outlet, flickering lights, a sparking receptacle, or a burning smell from the wall are not problems to put off. Left alone, a wiring fault can become a fire hazard.
Our electricians diagnose the source of the problem, not just the symptom. That means checking for short circuits, tracing the fault through the circuit, and confirming the fix before we leave. This is the kind of electrical work neighbors pass along by word of mouth, and we take that seriously.
We'll find the fault and fix it right.
No matter what's going wrong with your wiring, a weak or outdated panel is often the root of it. Older homes in the area frequently carry 60-amp or 100-amp service, fuse boxes, or panels that were never sized for today's electrical loads. A 200-amp panel upgrade gives your home the capacity it needs for modern appliances, EV chargers, and added circuits without constant tripping or overloads.
We handle the full scope: main panel replacement, service entrance upgrades, fuse box replacement, and subpanel installation for garages, workshops, or additions. We treat your home and its wiring the way we would our own, which means clean work, proper permits, and no shortcuts.
Pick up the phone and we'll handle the wiring.
Our electricians know the homes and wiring in this area, and a lot of them are carrying knob-and-tube or aluminum wiring that was never meant to last this long. Whole-house rewiring replaces that aging infrastructure with modern, code-compliant wiring that is safer and more reliable.
Beyond rewiring, we install GFCI and AFCI outlets, dimmer switches, USB outlets, outdoor and weatherproof receptacles, and dedicated circuits for major appliances. Need a 240-volt outlet for a dryer or range? A dedicated circuit for a new refrigerator or dishwasher? We run it cleanly and to code. We also install 240-volt circuits for hot tubs and similar equipment that requires its own protected line.
Reach out and we'll get it diagnosed.
When the job is done, we leave your home clean and powered, and that is especially true with lighting work. We install recessed lighting, LED retrofits, under-cabinet lighting, pendant lights, and chandeliers. Outside, we handle landscape lighting, security lighting, and motion sensor lights that improve safety around your property.
Ceiling fan installation is one of our most common residential calls. Whether you have existing wiring or need a new circuit run, we get the fan mounted, balanced, and wired correctly. We also install bathroom exhaust fans and attic fans, which play a real role in keeping California homes comfortable through the warmer months.
One ring and we're on it.
Winnetka sits in the western San Fernando Valley, where mild year-round weather, high solar adoption, and EV ownership above the state average shape what homeowners and businesses actually need from an electrician. The housing stock here runs heavily toward older California bungalows and mid-century homes, many carrying panels that were never designed for today's loads. The three services below come up constantly in this area, and we are set up to handle all of them.
California leads the country in electric vehicle adoption, and the San Fernando Valley reflects that. A Level 2 EV charger at home charges your vehicle overnight rather than trickle-charging through a standard outlet. The work involves a dedicated 240-volt circuit, the right breaker in your panel, and a charger mounted where you need it. We check panel capacity before we start, handle the permit, and install to manufacturer specs whether you are driving a Tesla, a Rivian, or any other EV.
We do not install solar panels, but we handle the electrical infrastructure that makes a solar and battery system work safely and legally. That means load calculations, panel capacity upgrades, dedicated circuits, and the transfer switch or interconnect wiring that ties a battery backup system into your home's power. With wildfire-season public-safety power shutoffs a real part of life in Los Angeles County, having a battery system that can carry critical loads during an outage is worth the investment. We make sure the wiring side is done right.
Grid events, utility switching, and the power fluctuations that come with wildfire-season shutoffs can send damaging voltage spikes through your home's wiring in a fraction of a second. A whole-home surge protector installs at the panel and catches those spikes before they reach your appliances, electronics, and HVAC equipment. It is a different category of protection from a power strip. Work performed by licensed electricians ensures the device is rated correctly and installed to code.
We'll find the fault and fix it right.
Our electricians know the homes and wiring in this area, and renovation work is where that knowledge pays off. We handle rough-in wiring for home additions, basement and garage wiring, workshop electrical, and garage subpanels. If you are building out a smart home, we wire for smart switches, smart panels, and low-voltage systems.
We also handle the electrical side of home sales: bringing wiring up to code, repairing code violations, and fixing work that failed a city inspection. Hire us and you are hiring a neighbor who knows the area, which means we understand what local inspectors look for and how to get the work signed off cleanly.
Reach out and we'll get it diagnosed.
When the job is done, we leave your home clean and powered, but sometimes the most valuable thing we can do is take a careful look before any work starts. An electrical safety inspection covers your panel condition, grounding and bonding, AFCI and GFCI compliance, wiring condition, and any code issues that need attention.
Schedule an inspection before buying a home, after storm or fire damage, or any time your home has older wiring that has not been evaluated recently. We check everything from the service entrance to the outlets and give you a clear picture of what is in good shape and what needs attention.
One ring and we're on it.
Dealing with a tripping breaker or a dead outlet at your business costs you time and customers. We work with property managers, office tenants, retail operators, and business owners across the area on commercial repair, installation, and capacity upgrades. Whether you need dedicated circuits for equipment, a panel sized for a growing business load, or electrical work for a new tenant buildout, we get it done.
We power your home. We protect your circuits. We earn the call.
No matter what's going wrong with your wiring, the first thing most people want to know is what it will cost. We give you a clear number before work starts. Estimates account for the scope of the job: the size of the panel, the number of circuits, how much of the home needs rewiring, and what permits are required.
Panel upgrade costs vary based on amperage and whether the service entrance needs work. Rewiring costs depend on square footage and how accessible the walls are. We explain the variables, give you a straight estimate, and get you on the schedule.
Pick up the phone and we'll handle the wiring.
U.S. Electric Force has been serving Winnetka and the surrounding communities since 2016. That is nearly a decade of residential and commercial electrical work in the western San Fernando Valley, built on repeat customers and referrals from neighbors who were happy with the job.
We serve Winnetka and the nearby communities of Reseda, Canoga Park, Woodland Hills, Chatsworth, West Hills, and Northridge. If you are looking to hire an electrician in this part of Los Angeles County, we are already in the area.
This is the kind of electrical work neighbors pass along by word of mouth, and that reputation matters to us every time we pick up a call.
One ring and we're on it.
Yes, same-day availability is something we work hard to maintain for both repairs and installations. When you call (747) 399-5446 in the morning, we do our best to get an electrician to your door that same day. Urgent situations and weekends are also covered.
We serve Winnetka and the surrounding communities throughout the western San Fernando Valley and Los Angeles County. That includes Reseda, Canoga Park, Chatsworth, West Hills, Northridge, Granada Hills, Tarzana, and Woodland Hills. If you are in this part of the Valley, there is a good chance we have worked in your neighborhood before.
Stop using the outlet or circuit immediately and do not plug anything else into it. If the panel itself is sparking or you smell burning, turn off the main breaker if it is safe to do so and call us right away. These are signs of a serious wiring fault that needs a professional diagnosis before you restore power to that circuit.
We give you a clear estimate before any work begins, and that number does not change unless the scope of the job changes. If we open a wall and find something unexpected, we stop and talk to you about it before we continue. There are no surprise charges at the end of a visit.
Someone over 18 should be present for the visit so we can walk through the problem together and get your sign-off before work begins. It also helps to have access to the panel and the areas where the issue is located. If you have specific constraints, call us and we will work out the details when you schedule.
We take calls on weekends and for urgent situations that cannot wait. Our standard hours run every day from 6:00 AM to 8:00 PM, and we are set up to handle time-sensitive electrical problems within that window. Call (747) 399-5446 and let us know what you are dealing with.
Yes, we work with homeowners, landlords, property managers, retail tenants, office occupants, and small business owners throughout the area. Commercial repair, panel upgrades, dedicated equipment circuits, and tenant improvement wiring are all part of what we do. If you manage multiple properties, we can coordinate that work professionally.
For routine installations and non-urgent work, booking a few days out is typical. For repairs and anything that affects your ability to use part of your home safely, we prioritize same-day or next-day scheduling whenever possible. Call (747) 399-5446 and we will give you a realistic arrival window based on current availability.
Absolutely, and we encourage it. Walking us through what you have noticed, including when it started and what the circuit powers, helps us diagnose faster and more accurately. The more context you can provide, the more efficiently we can trace the fault and get you a clear estimate.
Pricing depends on the scope of the work: the size of the panel, the number of circuits involved, how accessible the wiring is, and whether permits are required. We explain the variables, give you a straight estimate based on your actual situation, and get your approval before we start. We do not quote specific numbers over the phone because every job is different, but we are transparent about cost from the moment we arrive.
We explain what we found and what the fix involves before any work begins. If something changes mid-job, we come back to you with an updated picture before we proceed. When the work is done, we walk you through what was completed and what, if anything, to watch going forward.
U.S. Electric Force handles electrical repairs, panel upgrades, EV charger installation, outlet and wiring work, lighting, ceiling fans, safety inspections, and commercial electrical for customers across Winnetka and the San Fernando Valley. Same-day service is available, and we take calls on weekends and for urgent situations when you need an electrician now.
Call (747) 399-5446 for a quote.
Call in the morning. Powered by afternoon. Follow-up when you need it.
From a tripping breaker to a full panel upgrade, we handle the complete range of residential and commercial electrical work across Winnetka and the western San Fernando Valley. Every job is scoped honestly, estimated before work begins, and completed by licensed electricians who know the homes and wiring in this area. Whether you need a fast repair or a planned installation, the table below shows what we cover and what to expect from each service.
| Electrical Service | Scope of Work | Best For | What to Keep in Mind |
|---|---|---|---|
| Electrical Safety Inspections |
| Home buyers, owners of older homes, and anyone after storm or fire damage | An inspection before a home purchase can surface code issues and wiring problems that affect safety and value. We give you a clear picture of what is in good shape and what needs attention. |
| EV Charger Installation |
| EV owners who want overnight charging at home rather than a standard outlet | California EV adoption is among the highest in the country, and the San Fernando Valley reflects that. We check panel capacity before we start and install to manufacturer specs for any make or model. |
| Whole-Home Surge Protection |
| Any homeowner who wants to protect sensitive electronics and appliances from power surges | A whole-home surge protector is a different category from a power strip. Work performed by licensed electricians ensures the device is rated correctly and installed to code. |
| Wiring and Rewiring |
| Older homes with aging infrastructure or homeowners doing a full renovation | Knob-and-tube and aluminum wiring were not designed for modern electrical loads. Replacing them improves safety and can affect homeowner insurance eligibility. |
| Ceiling Fan Installation |
| Homeowners adding or replacing fans in living areas, bedrooms, or bathrooms | If there is no existing wiring at the ceiling location, we run a new circuit. Attic fans can help manage heat buildup during warm California months. |
| Lighting Installation |
| Homeowners renovating, upgrading to LED, or adding outdoor security lighting | Outdoor lighting tied to a motion sensor or timer adds both safety and convenience. We run the circuit and mount the fixture in one visit when wiring allows. |
| Dedicated Appliance Circuits |
| Homeowners adding a major appliance, workshop equipment, or outdoor spa | Major appliances and hot tubs require their own protected circuit. Sharing a circuit with other loads causes tripping and can damage equipment. |
| Breaker and Fuse Repair |
| Homeowners dealing with breakers that trip repeatedly or fuses that keep blowing | Repeated tripping usually points to an overloaded circuit or a failing breaker, not just a nuisance. We find the cause before replacing parts. |
| Electrical Repairs and Troubleshooting |
| Any homeowner or business owner with an active electrical problem | A wiring fault left unaddressed can become a fire hazard. We diagnose the source, not just the symptom, and confirm the fix before we leave. |
| Outlet and Switch Installation |
| Homeowners upgrading older outlets or adding receptacles in kitchens, baths, and outdoor areas | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. We bring existing outlets up to current standards when we work in those areas. |
| Solar and Battery Backup Wiring |
| Homeowners adding a battery backup system, especially ahead of wildfire-season power shutoffs | We handle the electrical infrastructure only, not panel installation. With public-safety power shutoffs a real part of life in Los Angeles County, having the wiring done right matters. |
| Electrical Panel and Service Upgrades |
| Homes with older 60- or 100-amp panels, frequent tripping, or added load from EVs and appliances | Panel work requires a permit and inspection. We handle both, and we check whether the service entrance needs upgrading at the same time. |
How do I know if my home needs a panel upgrade?
Common signs include breakers that trip frequently, a fuse box still in service, lights that dim when appliances run, or a panel that feels warm to the touch. Older homes in Winnetka and the surrounding Valley neighborhoods often carry 60- or 100-amp service that was never sized for today's loads. If you are adding an EV charger, a hot tub, or significant new circuits, we check panel capacity first and let you know whether an upgrade is needed before any other work begins.
What causes a breaker to trip over and over?
Repeated tripping usually means a circuit is being asked to carry more load than it was designed for, a breaker is aging and losing its rated tolerance, or there is a wiring fault somewhere on the circuit. It is not a problem to reset and ignore. We trace the fault, identify whether the issue is the load, the breaker, or the wiring, and give you a clear fix rather than a temporary reset.
Is the electrical work permitted and inspected?
Yes. Panel upgrades, service entrance work, new circuits, and rewiring all require permits and a city inspection in Los Angeles County. We pull the permit, schedule the inspection, and make sure the work is signed off before we consider the job complete. Permitted work protects you at resale and ensures the installation meets current code.
Same-Day and Emergency Availability
We take calls every day, including weekends, and we work to get an electrician to your door the same day for repairs and urgent situations. When the power is out or something is sparking, waiting days is not an option.
How do I know if the wiring in my older home is safe?
Homes built before the 1970s in Winnetka and the wider San Fernando Valley often have knob-and-tube or aluminum wiring that was not designed for modern electrical loads. Signs of concern include warm outlets, flickering lights, breakers that trip without explanation, or wiring that has never been evaluated. An electrical safety inspection gives you a clear picture of what is in good shape and what needs attention before a problem develops.
What does an EV charger installation involve?
A Level 2 home charger runs on a dedicated 240-volt circuit with its own breaker. We start by checking your panel capacity to make sure it can carry the added load. If the panel needs an upgrade first, we handle that as part of the same project. We then run the circuit, mount the charger where you need it, handle the permit, and install to manufacturer specs regardless of which EV you drive.
Why do outlets and switches stop working?
A dead outlet is often caused by a tripped GFCI somewhere upstream on the same circuit, a loose connection at the outlet itself, or a failed receptacle. A dead switch can mean a bad switch, a wiring connection that has worked loose over time, or a problem at the fixture. We trace the fault through the circuit rather than just swapping the part, so the fix holds.
Upfront Quotes With No Surprise Fees
We give you a clear estimate before work begins and we do not change that number unless the scope of the job changes. If something unexpected comes up, we stop and talk to you before we proceed.
What do flickering or dimming lights mean?
Occasional flickering when a large appliance starts up can be normal, but persistent flickering or lights that dim noticeably when other loads run usually point to a loose connection, a circuit that is overloaded, or a panel that is not delivering consistent voltage. In older homes, it can also indicate deteriorating wiring. It is worth having it looked at rather than assuming it will sort itself out.
Is it safe to have warm or buzzing outlets in my home?
No. A warm outlet or a buzzing sound from a receptacle or switch is a sign of a wiring problem, a loose connection, or a device that is drawing more current than the outlet is rated for. These are fire and shock hazards. Stop using the outlet, do not plug anything else into it, and call us. We will diagnose and fix the fault before you restore use of that circuit.
Experienced With Older and Newer Homes
The housing stock across Winnetka and the San Fernando Valley ranges from mid-century bungalows to newer construction, and we are familiar with both. Whether the home has knob-and-tube wiring or a modern panel that just needs more capacity, we know what we are looking at.
How do estimates and pricing work?
We give you a clear estimate before any work begins. Pricing depends on the scope: the size of the panel, the number of circuits involved, how accessible the wiring is, and whether permits are required. We explain the variables and give you a straight number based on your actual situation. If something unexpected turns up once work is underway, we stop and talk to you before we continue. There are no surprise charges at the end of a visit.
When should I call an electrician instead of trying a DIY fix?
Anything beyond replacing a light bulb or resetting a tripped breaker is worth a call. Outlet replacement, switch wiring, panel work, new circuits, and anything that requires opening a wall or working near the service entrance carries real shock and fire risk. Work performed by licensed electricians is also what keeps permitted jobs legal and insurable. If you are unsure whether a job is in your range, call us and we will give you an honest answer.
Do you offer same-day service for electrical problems?
Yes. Same-day availability is something we work to maintain for both repairs and urgent situations. We also take calls on weekends. If you have an active electrical problem, call us in the morning and we will do our best to get an electrician to your door that same day. Let us know what you are dealing with and we will give you a realistic arrival window.
Call us at (747) 399-5446 and we will walk you through what the job involves, give you a straight estimate, and get you on the schedule.
(747) 399-5446